2 DKSF-53-1-X-X-1|np trap info|np trap email to 1.3.6.1.4.1.25728.90.1.0 vmString mkDirect sutCustom # np trap email to 1 no 0 no no no no user-specified e-mail for NetPing Trap Forwarding Service 1.3.6.1.4.1.25728.90.1 npTrapEmailTo 255a ASN_OCTET_STR 255 DKSF-53-1-X-X-1|np relay: #[1.3.6.1.4.1.25728.5500.5.1.1]|np relayn 1.3.6.1.4.1.25728.5500.5.1.1 vmAbsolute mkTable sutCustom # np relayn 1 no 0 no no no no The N of output relay 1.3.6.1.4.1.25728.5500.5.1.1 npRelayN 1.3.6.1.4.1.25728.5500.5.1 ASN_INTEGER 1 DKSF-53-1-X-X-1|np relay: #[1.3.6.1.4.1.25728.5500.5.1.1]|np relay mode oid.dksf-53-1-x-x-1.nprelay.nprelaymode 1.3.6.1.4.1.25728.5500.5.1.2 vmAbsolute mkTable sutCustom # np relay mode 1 no 0 no no no no Control of relay: 0 - manual off 1 - manual on 2 - watchdog 3 - schedule 4 - both schedule and watchdog (while switched on by schedule) 5 - logic 6 - both schedule and logic (while switched on by schedule) 1.3.6.1.4.1.25728.5500.5.1.2 npRelayMode 1.3.6.1.4.1.25728.5500.5.1 ASN_INTEGER 0 DKSF-53-1-X-X-1|np relay: #[1.3.6.1.4.1.25728.5500.5.1.1]|np relay start reset 1.3.6.1.4.1.25728.5500.5.1.3 vmAbsolute mkTable sutCustom # np relay start reset 1 no 0 no no no no Write 1 to start reset (switch relay off for some time) 1.3.6.1.4.1.25728.5500.5.1.3 npRelayStartReset 1.3.6.1.4.1.25728.5500.5.1 ASN_INTEGER 0 DKSF-53-1-X-X-1|np relay: #[1.3.6.1.4.1.25728.5500.5.1.1]|np relay memo 1.3.6.1.4.1.25728.5500.5.1.6 vmString mkTable sutCustom # np relay memo 1 no 0 no no no no Relay memo 1.3.6.1.4.1.25728.5500.5.1.6 npRelayMemo 1.3.6.1.4.1.25728.5500.5.1 255a ASN_OCTET_STR 255 DKSF-53-1-X-X-1|np relay: #[1.3.6.1.4.1.25728.5500.5.1.1]|np relay flip oid.dksf-53-1-x-x-1.nprelay.nprelayflip 1.3.6.1.4.1.25728.5500.5.1.14 vmAbsolute mkTable sutCustom # np relay flip 1 no 0 no no no no Write -1 to flip between manual on and manual off states of relay 1.3.6.1.4.1.25728.5500.5.1.14 npRelayFlip 1.3.6.1.4.1.25728.5500.5.1 ASN_INTEGER 0 DKSF-53-1-X-X-1|np relay: #[1.3.6.1.4.1.25728.5500.5.1.1]|np relay state oid.dksf-53-1-x-x-1.nprelay.nprelaystate 1.3.6.1.4.1.25728.5500.5.1.15 vmAbsolute mkTable sutCustom # np relay state 1 no 0 no no no no Actual relay state at the moment, regardless of source of control. 0 - relay is off 1 - relay is on 1.3.6.1.4.1.25728.5500.5.1.15 npRelayState 1.3.6.1.4.1.25728.5500.5.1 ASN_INTEGER 0 DKSF-53-1-X-X-1|np relay trap data|np relay trapn 1.3.6.1.4.1.25728.5500.3.1.0 vmAbsolute mkDirect sutCustom # np relay trapn 1 no 0 no no no no The N of output relay 1.3.6.1.4.1.25728.5500.3.1 npRelayTrapN ASN_INTEGER 1 DKSF-53-1-X-X-1|np relay trap data|np relay trap mode oid.dksf-53-1-x-x-1.nprelaytrapdata.nprelaytrapmode 1.3.6.1.4.1.25728.5500.3.2.0 vmAbsolute mkDirect sutCustom # np relay trap mode 1 no 0 no no no no Control source of relay: 0 - manual off 1 - manual on 2 - watchdog 3 - schedule 4 - both schedule and watchdog (while switched on by schedule) 5 - logic 6 - both schedule and logic (while switched on by schedule) 1.3.6.1.4.1.25728.5500.3.2 npRelayTrapMode ASN_INTEGER 0 DKSF-53-1-X-X-1|np relay trap data|np relay trap memo 1.3.6.1.4.1.25728.5500.3.6.0 vmString mkDirect sutCustom # np relay trap memo 1 no 0 no no no no Relay memo 1.3.6.1.4.1.25728.5500.3.6 npRelayTrapMemo 255a ASN_OCTET_STR 255 DKSF-53-1-X-X-1|np relay trap data|np relay trap state oid.dksf-53-1-x-x-1.nprelaytrapdata.nprelaytrapstate 1.3.6.1.4.1.25728.5500.3.15.0 vmAbsolute mkDirect sutCustom # np relay trap state 1 no 0 no no no no Actual relay state at the moment, regardless of source of control. 0 - relay is off 1 - relay is on 1.3.6.1.4.1.25728.5500.3.15 npRelayTrapState ASN_INTEGER 0 DKSF-53-1-X-X-1|np relay trap data|np relay trap manual cmd src oid.dksf-53-1-x-x-1.nprelaytrapdata.nprelaytrapmanualcmdsrc 1.3.6.1.4.1.25728.5500.3.18.0 vmAbsolute mkDirect sutCustom # np relay trap manual cmd src 1 no 0 no no no no Source of command to change Mode of Control for Relay 1.3.6.1.4.1.25728.5500.3.18 npRelayTrapManualCmdSrc ASN_INTEGER 0 DKSF-53-1-X-X-1|np relay trap data|np relay trap date time 1.3.6.1.4.1.25728.5500.3.19.0 vmString mkDirect sutCustom # np relay trap date time 1 no 0 no no no no Timestamp of event 1.3.6.1.4.1.25728.5500.3.19 npRelayTrapDateTime 255a ASN_OCTET_STR 255 DKSF-53-1-X-X-1|np pwr: #[1.3.6.1.4.1.25728.5800.3.1.1]|np pwr channeln 1.3.6.1.4.1.25728.5800.3.1.1 vmAbsolute mkTable sutCustom # np pwr channeln 1 no 0 no no no no The id of watchdog/power channel 1.3.6.1.4.1.25728.5800.3.1.1 npPwrChannelN 1.3.6.1.4.1.25728.5800.3.1 ASN_INTEGER 1 DKSF-53-1-X-X-1|np pwr: #[1.3.6.1.4.1.25728.5800.3.1.1]|np pwr start reset 1.3.6.1.4.1.25728.5800.3.1.2 vmAbsolute mkTable sutCustom # np pwr start reset 1 no 0 no no no no Write 1 to start forced reset On read: 0 - normal operation 1 - reset is active 2 - reboot pause is active or watchdog is inactive 1.3.6.1.4.1.25728.5800.3.1.2 npPwrStartReset 1.3.6.1.4.1.25728.5800.3.1 ASN_INTEGER 0 DKSF-53-1-X-X-1|np pwr: #[1.3.6.1.4.1.25728.5800.3.1.1]|np pwr manual mode oid.dksf-53-1-x-x-1.nppwr.nppwrmanualmode 1.3.6.1.4.1.25728.5800.3.1.3 vmAbsolute mkTable sutCustom # np pwr manual mode 1 no 0 no no no no Mode of power channel 0 - manual off 1 - manual on 2 - watchdog 3 - schedule 4 - schedule and watchdog 5 - controlled by Logic 1.3.6.1.4.1.25728.5800.3.1.3 npPwrManualMode 1.3.6.1.4.1.25728.5800.3.1 ASN_INTEGER 0 DKSF-53-1-X-X-1|np pwr: #[1.3.6.1.4.1.25728.5800.3.1.1]|np pwr resets counter 1.3.6.1.4.1.25728.5800.3.1.4 vmAbsolute mkTable sutCustom # np pwr resets counter 1 no 0 no no no no Counter of watchdog resets Write 0 to clear. 1.3.6.1.4.1.25728.5800.3.1.4 npPwrResetsCounter 1.3.6.1.4.1.25728.5800.3.1 ASN_INTEGER 0 DKSF-53-1-X-X-1|np pwr: #[1.3.6.1.4.1.25728.5800.3.1.1]|np pwr repeating resets counter 1.3.6.1.4.1.25728.5800.3.1.5 vmAbsolute mkTable sutCustom # np pwr repeating resets counter 1 no 0 no no no no Counter of continous failed watchdog resets 1.3.6.1.4.1.25728.5800.3.1.5 npPwrRepeatingResetsCounter 1.3.6.1.4.1.25728.5800.3.1 ASN_INTEGER 0 DKSF-53-1-X-X-1|np pwr: #[1.3.6.1.4.1.25728.5800.3.1.1]|np pwr memo 1.3.6.1.4.1.25728.5800.3.1.6 vmString mkTable sutCustom # np pwr memo 1 no 0 no no no no Relay channel memo 1.3.6.1.4.1.25728.5800.3.1.6 npPwrMemo 1.3.6.1.4.1.25728.5800.3.1 255a ASN_OCTET_STR 255 DKSF-53-1-X-X-1|np pwr: #[1.3.6.1.4.1.25728.5800.3.1.1]|np pwr relay flip oid.dksf-53-1-x-x-1.nppwr.nppwrrelayflip 1.3.6.1.4.1.25728.5800.3.1.14 vmAbsolute mkTable sutCustom # np pwr relay flip 1 no 0 no no no no Write -1 to flip between manual on and manual off states of relay 1.3.6.1.4.1.25728.5800.3.1.14 npPwrRelayFlip 1.3.6.1.4.1.25728.5800.3.1 ASN_INTEGER 0 DKSF-53-1-X-X-1|np pwr: #[1.3.6.1.4.1.25728.5800.3.1.1]|np pwr relay state oid.dksf-53-1-x-x-1.nppwr.nppwrrelaystate 1.3.6.1.4.1.25728.5800.3.1.15 vmAbsolute mkTable sutCustom # np pwr relay state 1 no 0 no no no no Actual relay state at the moment, regardless of source of control. 0 - relay is off 1 - relay is on 1.3.6.1.4.1.25728.5800.3.1.15 npPwrRelayState 1.3.6.1.4.1.25728.5800.3.1 ASN_INTEGER 0 DKSF-53-1-X-X-1|np thermo: #[1.3.6.1.4.1.25728.8800.1.1.1]|np thermo sensorn 1.3.6.1.4.1.25728.8800.1.1.1 vmAbsolute mkTable sutCustom # np thermo sensorn 1 no 0 no no no no The id of temperature sensor, 1 to 8 1.3.6.1.4.1.25728.8800.1.1.1 npThermoSensorN 1.3.6.1.4.1.25728.8800.1.1 ASN_INTEGER 1 DKSF-53-1-X-X-1|np thermo: #[1.3.6.1.4.1.25728.8800.1.1.1]|np thermo value 1.3.6.1.4.1.25728.8800.1.1.2 vmAbsolute mkTable sutCustom # np thermo value 1 no 0 no no no no Temperature, deg.C 1.3.6.1.4.1.25728.8800.1.1.2 npThermoValue 1.3.6.1.4.1.25728.8800.1.1 ASN_INTEGER -60 DKSF-53-1-X-X-1|np thermo: #[1.3.6.1.4.1.25728.8800.1.1.1]|np thermo status oid.dksf-53-1-x-x-1.npthermo.npthermostatus 1.3.6.1.4.1.25728.8800.1.1.3 vmAbsolute mkTable sutCustom # np thermo status 1 no 0 no no no no Temperature status (0=fault, 1=underheat, 2=normal, 3=overheat) 1.3.6.1.4.1.25728.8800.1.1.3 npThermoStatus 1.3.6.1.4.1.25728.8800.1.1 ASN_INTEGER 0 DKSF-53-1-X-X-1|np thermo: #[1.3.6.1.4.1.25728.8800.1.1.1]|np thermo low 1.3.6.1.4.1.25728.8800.1.1.4 vmAbsolute mkTable sutCustom # np thermo low 1 no 0 no no no no Bottom margin of normal temperature range, deg.C 1.3.6.1.4.1.25728.8800.1.1.4 npThermoLow 1.3.6.1.4.1.25728.8800.1.1 ASN_INTEGER -60 DKSF-53-1-X-X-1|np thermo: #[1.3.6.1.4.1.25728.8800.1.1.1]|np thermo high 1.3.6.1.4.1.25728.8800.1.1.5 vmAbsolute mkTable sutCustom # np thermo high 1 no 0 no no no no Top margin of normal temperature range, deg.C 1.3.6.1.4.1.25728.8800.1.1.5 npThermoHigh 1.3.6.1.4.1.25728.8800.1.1 ASN_INTEGER -60 DKSF-53-1-X-X-1|np thermo: #[1.3.6.1.4.1.25728.8800.1.1.1]|np thermo memo 1.3.6.1.4.1.25728.8800.1.1.6 vmString mkTable sutCustom # np thermo memo 1 no 0 no no no no T channel memo 1.3.6.1.4.1.25728.8800.1.1.6 npThermoMemo 1.3.6.1.4.1.25728.8800.1.1 255a ASN_OCTET_STR 255 DKSF-53-1-X-X-1|np thermo traps|np thermo trap sensorn 1.3.6.1.4.1.25728.8800.2.1.0 vmAbsolute mkDirect sutCustom # np thermo trap sensorn 1 no 0 no no no no The id of temperature sensor, 1 to 8 1.3.6.1.4.1.25728.8800.2.1 npThermoTrapSensorN ASN_INTEGER 1 DKSF-53-1-X-X-1|np thermo traps|np thermo trap value 1.3.6.1.4.1.25728.8800.2.2.0 vmAbsolute mkDirect sutCustom # np thermo trap value 1 no 0 no no no no Temperature, deg.C 1.3.6.1.4.1.25728.8800.2.2 npThermoTrapValue ASN_INTEGER -60 DKSF-53-1-X-X-1|np thermo traps|np thermo trap status oid.dksf-53-1-x-x-1.npthermotraps.npthermotrapstatus 1.3.6.1.4.1.25728.8800.2.3.0 vmAbsolute mkDirect sutCustom # np thermo trap status 1 no 0 no no no no Temperature status (0=fault, 1=underheat, 2=normal, 3=overheat) 1.3.6.1.4.1.25728.8800.2.3 npThermoTrapStatus ASN_INTEGER 0 DKSF-53-1-X-X-1|np thermo traps|np thermo trap low 1.3.6.1.4.1.25728.8800.2.4.0 vmAbsolute mkDirect sutCustom # np thermo trap low 1 no 0 no no no no Bottom margin of normal temperature range, deg.C 1.3.6.1.4.1.25728.8800.2.4 npThermoTrapLow ASN_INTEGER -60 DKSF-53-1-X-X-1|np thermo traps|np thermo trap high 1.3.6.1.4.1.25728.8800.2.5.0 vmAbsolute mkDirect sutCustom # np thermo trap high 1 no 0 no no no no Top margin of normal temperature range, deg.C 1.3.6.1.4.1.25728.8800.2.5 npThermoTrapHigh ASN_INTEGER -60 DKSF-53-1-X-X-1|np thermo traps|np thermo trap memo 1.3.6.1.4.1.25728.8800.2.6.0 vmString mkDirect sutCustom # np thermo trap memo 1 no 0 no no no no T channel memo 1.3.6.1.4.1.25728.8800.2.6 npThermoTrapMemo 255a ASN_OCTET_STR 255 DKSF-53-1-X-X-1|np io: #[1.3.6.1.4.1.25728.8900.1.1.1]|np io linen 1.3.6.1.4.1.25728.8900.1.1.1 vmAbsolute mkTable sutCustom # np io linen 1 no 0 no no no no Number of IO line, from 1 to max supported 1.3.6.1.4.1.25728.8900.1.1.1 npIoLineN 1.3.6.1.4.1.25728.8900.1.1 ASN_INTEGER 1 DKSF-53-1-X-X-1|np io: #[1.3.6.1.4.1.25728.8900.1.1.1]|np io level in 1.3.6.1.4.1.25728.8900.1.1.2 vmAbsolute mkTable sutCustom # np io level in 1 no 0 no no no no Input level, 0 or 1 1.3.6.1.4.1.25728.8900.1.1.2 npIoLevelIn 1.3.6.1.4.1.25728.8900.1.1 ASN_INTEGER 0 DKSF-53-1-X-X-1|np io: #[1.3.6.1.4.1.25728.8900.1.1.1]|np io level out oid.dksf-53-1-x-x-1.npio.npiolevelout 1.3.6.1.4.1.25728.8900.1.1.3 vmAbsolute mkTable sutCustom # np io level out 1 no 0 no no no no Output level 1.3.6.1.4.1.25728.8900.1.1.3 npIoLevelOut 1.3.6.1.4.1.25728.8900.1.1 ASN_INTEGER 0 DKSF-53-1-X-X-1|np io: #[1.3.6.1.4.1.25728.8900.1.1.1]|np io memo 1.3.6.1.4.1.25728.8900.1.1.6 vmString mkTable sutCustom # np io memo 1 no 0 no no no no IO line memo 1.3.6.1.4.1.25728.8900.1.1.6 npIoMemo 1.3.6.1.4.1.25728.8900.1.1 255a ASN_OCTET_STR 255 DKSF-53-1-X-X-1|np io: #[1.3.6.1.4.1.25728.8900.1.1.1]|np io pulse counter 1.3.6.1.4.1.25728.8900.1.1.9 vmDiff mkTable sutCustom # np io pulse counter 1 no 0 no no yes no Pulse Counter on IO input line (counts positive fronts) Write 0 to reset. 1.3.6.1.4.1.25728.8900.1.1.9 npIoPulseCounter 1.3.6.1.4.1.25728.8900.1.1 ASN_COUNTER 0 DKSF-53-1-X-X-1|np io: #[1.3.6.1.4.1.25728.8900.1.1.1]|np io single pulse duration 1.3.6.1.4.1.25728.8900.1.1.12 vmAbsolute mkTable sutCustom # np io single pulse duration 1 no 0 no no no no Set duration of single pulse on IO output line, 100ms to 25500ms, min. step is 100ms 1.3.6.1.4.1.25728.8900.1.1.12 npIoSinglePulseDuration 1.3.6.1.4.1.25728.8900.1.1 ASN_INTEGER 100 DKSF-53-1-X-X-1|np io: #[1.3.6.1.4.1.25728.8900.1.1.1]|np io single pulse start 1.3.6.1.4.1.25728.8900.1.1.13 vmAbsolute mkTable sutCustom # np io single pulse start 1 no 0 no no no no Write 1 to start single pulse on IO output. Output will be inverted for time, specified by npIoSinglePulseDuration 1.3.6.1.4.1.25728.8900.1.1.13 npIoSinglePulseStart 1.3.6.1.4.1.25728.8900.1.1 ASN_INTEGER 0 DKSF-53-1-X-X-1|np io traps|np io trap linen 1.3.6.1.4.1.25728.8900.2.1.0 vmAbsolute mkDirect sutCustom # np io trap linen 1 no 0 no no no no Trap data, Number of IO line 1.3.6.1.4.1.25728.8900.2.1 npIoTrapLineN ASN_INTEGER 1 DKSF-53-1-X-X-1|np io traps|np io trap level in 1.3.6.1.4.1.25728.8900.2.2.0 vmAbsolute mkDirect sutCustom # np io trap level in 1 no 0 no no no no Trap data, new Input level, 0 or 1 1.3.6.1.4.1.25728.8900.2.2 npIoTrapLevelIn ASN_INTEGER 0 DKSF-53-1-X-X-1|np io traps|np io trap memo 1.3.6.1.4.1.25728.8900.2.6.0 vmString mkDirect sutCustom # np io trap memo 1 no 0 no no no no Trap data, IO line memo 1.3.6.1.4.1.25728.8900.2.6 npIoTrapMemo 255a ASN_OCTET_STR 255 DKSF-53-1-X-X-1|np rel hum sensor|np rel hum sensor status oid.dksf-53-1-x-x-1.nprelhumsensor.nprelhumsensorstatus 1.3.6.1.4.1.25728.8400.2.3.0 vmAbsolute mkDirect sutCustom # np rel hum sensor status 1 no 0 no no no no Status of the Rel.Humidity Sensor One 1=Normal, 0=Error or Sensor isn't connected 1.3.6.1.4.1.25728.8400.2.3 npRelHumSensorStatus ASN_INTEGER 0 DKSF-53-1-X-X-1|np rel hum sensor|np rel hum sensor valueh 1.3.6.1.4.1.25728.8400.2.2.0 vmAbsolute mkDirect sutCustom # np rel hum sensor valueh 1 no 0 no no no no Relative humidity value, % 1.3.6.1.4.1.25728.8400.2.2 npRelHumSensorValueH ASN_INTEGER 0 DKSF-53-1-X-X-1|np rel hum sensor|np rel hum sensor valuet 1.3.6.1.4.1.25728.8400.2.4.0 vmAbsolute mkDirect sutCustom # np rel hum sensor valuet 1 no 0 no no no no Sensor temperature, deg.C 1.3.6.1.4.1.25728.8400.2.4 npRelHumSensorValueT ASN_INTEGER -60 DKSF-53-1-X-X-1|np rel hum sensor|np rel hum sensor statush oid.dksf-53-1-x-x-1.nprelhumsensor.nprelhumsensorstatush 1.3.6.1.4.1.25728.8400.2.5.0 vmAbsolute mkDirect sutCustom # np rel hum sensor statush 1 no 0 no no no no Status of Relative Humiduty 1.3.6.1.4.1.25728.8400.2.5 npRelHumSensorStatusH ASN_INTEGER 0 DKSF-53-1-X-X-1|np rel hum sensor|np rel hum safe range high 1.3.6.1.4.1.25728.8400.2.7.0 vmAbsolute mkDirect sutCustom # np rel hum safe range high 1 no 0 no no no no Relative Humidity safe range, top margin, %RH 1.3.6.1.4.1.25728.8400.2.7 npRelHumSafeRangeHigh ASN_INTEGER 0 DKSF-53-1-X-X-1|np rel hum sensor|np rel hum safe range low 1.3.6.1.4.1.25728.8400.2.8.0 vmAbsolute mkDirect sutCustom # np rel hum safe range low 1 no 0 no no no no Relative Humidity safe range, bottom margin, %RH 1.3.6.1.4.1.25728.8400.2.8 npRelHumSafeRangeLow ASN_INTEGER 0 DKSF-53-1-X-X-1|np rel hum sensor|np rel hum sensor valuet100 1.3.6.1.4.1.25728.8400.2.9.0 vmAbsolute mkDirect sutCustom # np rel hum sensor valuet100 1 no 0 no no no no Sensor temperature, deg.C * 100 (fixed point two decimal places) Used to get access to the fractional part of T value 1.3.6.1.4.1.25728.8400.2.9 npRelHumSensorValueT100 ASN_INTEGER 0 DKSF-53-1-X-X-1|np ir ctrl|np ir play cmd 1.3.6.1.4.1.25728.7900.1.1.0 vmAbsolute mkDirect sutCustom # np ir play cmd 1 no 0 no no no no Write IR command number to send IR command 1.3.6.1.4.1.25728.7900.1.1 npIrPlayCmd ASN_INTEGER 1 DKSF-53-1-X-X-1|np ir ctrl|np ir reset 1.3.6.1.4.1.25728.7900.1.2.0 vmAbsolute mkDirect sutCustom # np ir reset 1 no 0 no no no no Write 1 to reset IR transiever. After reset, send IR command and check npIrStatus. 1.3.6.1.4.1.25728.7900.1.2 npIrReset ASN_INTEGER 0 DKSF-53-1-X-X-1|np ir ctrl|np ir status oid.dksf-53-1-x-x-1.npirctrl.npirstatus 1.3.6.1.4.1.25728.7900.1.3.0 vmAbsolute mkDirect sutCustom # np ir status 1 no 0 no no no no IR transiever status 1.3.6.1.4.1.25728.7900.1.3 npIrStatus ASN_INTEGER 0 DKSF-53-1-X-X-1|np reboot|np soft reboot 1.3.6.1.4.1.25728.911.1.0 vmAbsolute mkDirect sutCustom # np soft reboot 1 no 0 no no no no Write 1 to reboot device after current operations completition 1.3.6.1.4.1.25728.911.1 npSoftReboot ASN_INTEGER 0 DKSF-53-1-X-X-1|np reboot|np reset stack 1.3.6.1.4.1.25728.911.2.0 vmAbsolute mkDirect sutCustom # np reset stack 1 no 0 no no no no Write 1 to re-initialize network stack 1.3.6.1.4.1.25728.911.2 npResetStack ASN_INTEGER 0 DKSF-53-1-X-X-1|np reboot|np forced reboot 1.3.6.1.4.1.25728.911.3.0 vmAbsolute mkDirect sutCustom # np forced reboot 1 no 0 no no no no Write 1 to immediate forced reboot 1.3.6.1.4.1.25728.911.3 npForcedReboot ASN_INTEGER 0 -1 flip 0 low 1 high 0 commandCompleted 1 protocolError 2 commandAccepted 16 errorUnknown 17 errorBadNumber 18 errorEmptyRecord 19 errorFlashChip 20 errorTimeout 21 errorExtBusBusy 0 off 1 on 2 watchdog 3 schedule 4 scheduleAndWatchdog 5 logic -1 flip 0 off 1 on -1 flip 0 off 1 on 2 watchdog 3 schedule 4 scheduleAndWatchdog 5 logic 6 scheduleAndLogic 0 off 1 on -1 unknown 1 webInterface 2 snmp 3 sms 4 httpApi 0 off 1 on 2 watchdog 3 schedule 4 scheduleAndWatchdog 5 logic 6 scheduleAndLogic 0 off 1 on 0 error 1 ok 0 sensorFailed 1 belowSafeRange 2 inSafeRange 3 aboveSafeRange 0 failed 1 low 2 norm 3 high 0 failed 1 low 2 norm 3 high